「カスタマイズ/Bluetooth Stack変更」の編集履歴（バックアップ）一覧はこちら

「カスタマイズ/Bluetooth Stack変更」の最新版変更点

追加された行はこの色になります。

削除された行はこの色になります。

+The first thing you need to do is remove the Toshiba bluetooth- go to Add/Remove Programs and remove it.Then do a reboot and Windows will pop up a couple of detected new hardware dialogs - just cancel them though, they won't find drivers even if you do a search online.What you need to do is go to device manager and take a look at the properties of the unknown USB device with the exclamation mark. 
 
+This will be the Bluetooth module. In the properties window go over to the Details tab and take a look at the Device Instance ID. Here you will find the VID & PID for the bluetooth module. I assume they will be the same on all Wind's/Advents etc.. as long as they use the same bluetooth module in them all. Now go and edit c:\windows\inf\bth.inf (make a backup first if you want). 
+
+Now, you could put a new manufacturer in here or just go straight down to the section: [Toshiba.NT.5.1]. Then copy and paste the whole 'TOSHIBA Intergrated Bluetooth 3=' line, so that there will be two lines exactly the same. Then change the new duplicate line from Bluetooth 3= to Bluetooth 4=. Also change the current VID & PID on the new Bluetooth 4= line to match up with the ones you got from the device manager. So final line looks like this:
+
+TOSHIBA Integrated Bluetooth 4= BthUsb, USB\VID_0DB0&PID_A97A
+
+Then, save the file and do a scan for hardware changes in device manager (right click on your computer name). All being well, it should now detect your bluetooth module as a 'TOSHIBA Integrated Bluetooth 4' and install a whole bunch of drivers for it.